Fly Line Management Hack
A couple of hacks to help speed line changes or spooling lines to clean. In effect, I have 3 spools tools:
- RIO Cranky – designed for RIO spools that have a square hole registration hole on one side (at the bottom on the picture below).
- RIO Cranky modified – to be used with a drill (top right) on RIO spools.
- Drill Tool – for spools with circular holes.
.
Key actions:
- For the drill ends, I took 2 old long driver bits and cut off the head. Created a flat and clean the shaft
- For the Modified Cranky, I cut off the handle.
- For the Round Tool, I am using a 5/16″ bolt and insert, with cork and neoprene washers.
- Used a wood lathe and some scraps to create an adapter to suit each end.
Some break down images.
.
.
.
🙂
[…] for years used the RIO Cranky to spool lines, either to wash or store. I have even implemented a hack to improve winding. This hack enables a drill, which is not only faster, but find I can get a better […]
Line Management – SA Regulator | Raspberryfisher's Blog
2022/04/30 at 21:59